2019 NAPA Reference Guide

A-97 Passenger car air filters using ""circular layers"" of filter media supported by molded plastic spacers. Height Top or Major O.D. Bottom or Minor O.D. Top or Major I.D. Bottom or Minor I.D. Part Number 2.760 6.100 6.870 CLOSED 0.000 6182 2.760 9.528 10.230 CLOSED 0.000 6058 2.795 8.661 7.952 CLOSED 0.000 6043 2.840 7.750 8.700 CLOSED 0.000 2333 A-102 Positive crankcase ventilation system filter. Located inside the air intake filter housing. Unit is disposable. High efficiency pleated paper media. Length Width Height Part Number 4.390 1.260 2.430 6976 4.390 1.260 2.769 6977 A-103 Cone-shaped air filter with pleated paper media protected by inner and outer metal bodies. Attached gasket on outlet end. Offset lid on other end serves as housing cover when filter is installed. Height Top or Major O.D. Bottom or Minor O.D. Top or Major I.D. Bottom or Minor I.D. Part Number 20.531 11.600 10.625 CLOSED 6.687 6800 20.540 11.620 10.620 CLOSED 6.610 6929 22.531 11.600 10.625 CLOSED 6.687 6883 22.531 11.600 10.625 CLOSED 6.687 6883NP 23.250 8.120 7.360 0.406 4.670 6841 28.531 9.730 8.656 CLOSED 5.187 6877 28.531 11.600 10.625 CLOSED 6.687 6882 A-105 Oval- (6264) and round- (6265) shaped filters with exposed pleated media, closed metal end cap, open metal other end and attached sealing gasket. Height Top or Major O.D. Bottom or Minor O.D. Top or Major I.D. Bottom or Minor I.D. Part Number 6.693 8.504 6.890 CLOSED 3.150 6265 6.700 8.050 6.760 CLOSED 5.320 6264 A-107 Panel-type filter with pleated paper or non-woven media. Outer edge is plastic and serves as seal in housing. One corner is ""chopped"" off. Media color will vary. Length Width Height Part Number 7.874 6.535 1.476 6158 9.937 8.937 1.301 200947 10.400 8.062 1.765 6021 10.630 7.205 1.535 6031 10.718 5.990 1.577 6062 11.250 9.250 1.650 6823 11.417 6.496 1.633 6802 13.327 6.201 1.969 6110 A-108 Part no. 6277 has exposed pleats, (no outer body) closed metal top and plastic outlet pipe. Part no. 6296 has metal outer body, pleated media, plastic ends and inlet holes around top end. Height Top or Major O.D. Bottom or Minor O.D. Top or Major I.D. Bottom or Minor I.D. Part Number 7.320 5.000 2.930 CLOSED 2.850 6277 7.380 4.500 4.500 CLOSED 1.500 6790 8.355 5.485 2.190 CLOSED 1.820 6296 A-97 — A-108 AIR FILTER DESIGN ILLUSTRATIONS 918 T E C H N I C A L D A T A